511026 Rev. 07-01-19
97
6.7.4 Position Test
The position test moves the robotic assembly vertically between two element locations. The test does not
move cartridges. You can select the number of times to move the robotic assembly between two element
positions.
The position test is intended to show that the vertical movement of the robotic assembly is operating
correctly. To diagnose problems with the robotic assembly itself or verify that it has been correctly
replaced, use the
To run the position test:
1.
Navigate to the
Maintenance > Library Tests > Position Test
screen.
2.
Select a source location from the
Source Elements
list.
3.
Select a destination location from the
Destination Elements
list.
4.
Select the number of cycles.
5.
Click
Start Test
.
