Q40 Tape Library
Installation and Operations Manual
511026 Rev. 07-01-19
96
6.7.3 Element to Element Test
The element to element test moves a selected cartridge to a selected slot or tape drive, and then returns
it to the original slot. You can select the number of times to move the selected cartridge to the destination
location and back.
The element to element test is intended to show that the library is operating correctly. To diagnose
problems with the robotic assembly or verify that it has been correctly replaced, use the
To run the element test:
1.
Navigate to the
Maintenance > Library Tests > Element to Element Test
screen.
2.
Select a cartridge from the
Source Elements
list.
3.
To select from a subset of the cartridges:
1.
Click
Filter On
.
2.
Enter characters into the search box and then click
Search
.
4.
The
Source Elements
list is updated to only include cartridges with a barcode label including the
search characters.
5.
Select a location from the
Destination Elements
list.
6.
Select the number of cycles.
7.
Click
Start Test
.
