PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 73 / 84

68 rev. 7-2017 114A3873.D
Wireless Door Alarm System
8 Is the wireless receiver communicating with the wireless
multiplexer?
Check the LEDs in the upper right-hand corner of the wireless
multiplexer board.
When the wireless receiver is connected and working properly,
LEDs
D39 and D41
will blink whenever there is door activity at
the site. See Drawing 20 on page 64
Additionally, when the wireless multiplexer is powered up, the
display on the wireless multiplexer will show
RECEIVER ON
0001
if the wireless receiver is connected.
Yes
– Skip to Step 10
No
– Proceed to Step 10
10 Have any transmitters been registered to the wireless
multiplexer?
Yes
– Proceed to Step 11
No
– Register the
transmitter and retest
9 Does the display on the wireless multiplexer show any
activity besides
Receiver On
?
Yes
– Proceed to Step 10
No
– Register the
transmitters and retest