PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 3 / 84

iii rev. 7-2017 114A3873.D
Wireless Door Alarm System
This equipment generates, uses, and can radiate radio frequency energy and if
not installed and used in accordance with the instruction manual, may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to Subpart J of Part 15
of FCC rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment. Operation of this
equipment in a residential area is likely to cause interference in which case the
user, at his/her own expense, will be required to take whatever measures may be
required to correct the interference.
With the RS485 communication scheme, a keypad can be located as far as 4000
feet from the controller, therefore shielded twisted pair cable with ground wire is
required for optimal operation. Additionally, larger gauge wire must be used the
farther the device is from the controller,
The system will not operate properly if the voltage is below 12VDC.
Extreme care should be taken when choosing a power supply voltage and current
rating. Long distance runs may require a remote power supply to be installed in
line with an RB5 relay to ensure proper operation.
Do NOT run low voltage system wires in the same conduit as high
voltage wiring
Incorrect installation of electrical components can result in
damage to electronics as well as personal injury.
Cross-wiring the AC power with the DC power will damage the
electronics.
Cross-Wiring the Power wires with the Data wires will damage
the electronics
Cross-wiring the positive and negative on the DC part of the
system will damage the electronics.
Warning: The User should follow all installation, operation, and
maintenance instructions. T
he User is strongly advised to conduct product
and systems tests at least once each week. Changes in environmental conditions,
electric or electronic disruptions and tampering may cause the product to not
perform as expected.
PTI Security Systems warrants its Product to the User.
The User is
responsible for exercising all due prudence and taking necessary precautions for
the safety and protection of lives and property wherever PTI Security Systems
products are installed. PTI Security Systems does not authorize the use of its
products in applications affecting life safety.