PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 43 / 84

38 rev. 7-2017 114A3873.D
Wireless Door Alarm System
Relay 2 Function
Relay #2 Function:
ALARM OUTPUT
Press
*
to Change,
PRESS # WHEN DONE
Relay 1 on the multiplexer is always set to function like the relay on
any keypad or access control device. It can also function as a relay
board relay, if desired. The Relay 2 Function parameter controls
the operation of Relay 2 on the multiplexer. The available options
are:
• Alarm Output
• Hold Open by Time
• Slave to Relay 1
• Different Hold Time
• Aux. Output.
Alarm Output
Sets Relay 2 to activate when the controller sends an alarm. In
this mode, it can be used to trigger an external siren or strobe
light. The controller determines the length of time the relay will
be active.
Hold Open by Time
Allows Relay 2 to activate or deactivate at a specific time of day.
Each day of the week can have different activate and deactivate
times.
As an example, the relay can be used to Open or Close a secondary
gate. (The
activate
time is referred to as the open time and the
deactivate
time is referred to as the close time. In this scenario
the multiplexer will prompt for the open and close times for each