PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 19 / 84

14 rev. 7-2017 114A3873.D
Wireless Door Alarm System
Swing Doors
On swing doors, the transmitter should be mounted in a location
high on the door, out of the way of the door swing, and out of the
path of doorway traffic.
The transmitter should be installed on the hasp side of the door on
the jamb, or the header. See pages page 15 and page 16 for
detailed swing door mounting instructions.
Position the magnet with the smallest possible gap between the
magnet and the transmitter box. The transmitter box should be as
close to the magnet as possible.
U se the alignment marks on the transmitter box to position the box
and magnet.
Remember that swing doors can move due to wind or other causes.
If there is too much movement on the latch side of the door, place
the transmitter and magnet towards the the center of the door to
reduce the chance of false alarms.
In some cases, there may not be enough room on the door jamb,
or header, for the transmitter box. In these situations, mount the
transmitter on the door and mount the magnet on the jamb, or
header. However, this is not usually recommended due to the
greater risk of damage to the transmitter from door movement.
At no time should the magnet be more than ½” from the
transmitter box after installation.