PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 16 / 84

Wireless Door Alarm System
11 114A3873.D rev. 7-2017
Door Header Mounting Instructions
1 Apply PL Premium
®
construction adhesive to the back of
the magnet. Align the center of the magnet with the narrow
mark on the side of the mounting plate facing the door and
rivet the magnet to the door no more than ½ inch away
from the mounting plate with two screws (type of screw used
to be determined by door type). See page 5 for more
information.
2 Apply PL Premium ® construction adhesive to the back of the
mounting plate and use two wall anchors and two #8 x 1” flat
head screws to fasten mounting plate.
3 Note: Place the box and magnet out of the travel path of
the toe plate and/or the door handle
.
4 Position the box bottom with the magnet alignment mark
facing toward the door and fasten the wireless box bottom to
the mounting plate using two 6-32 x 3/8” pan head screws.
5 Place the PC board in the box bottom and hold in place until
the box cover is in place.
6 Fasten the box cover to the box bottom using two #6 x 1-½”
flat head screws.
Use this method if a door jamb mount not possible
Application Note: Always use PL Premium® adhesive on the
magnet and the mounting plate. The box assembly should
be mounted as high as possible on the jamb to prevent
damage.