PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 44 / 84

Wireless Door Alarm System
39 114A3873.D rev. 7-2017
day of the week Monday through Sunday. It will also ask for the
Holiday open and close times, and the next holiday date. The
multiplexer will automatically track the date and time and control
the relay accordingly.
Slave to Relay 1
Causes Relay 2 to activate when Relay 1 activates and release when
Relay 1 deactivates. This option is used when relays are controlling
a gate or other device that requires two isolated relays.
Different Hold Time
This function activates Relay 2 when Relay 1 activates but deactivates
Relay 2 at a different time. When selected, the multiplexer prompts
for the Relay 2 hold time. Note: Relay 1 activity time is always
controlled from the controller. This option is designed to work with
devices that use different hold times. It can also be used to activate
a door holder.
Aux. Output
Enables Relay 2 to act as a second relay on the multiplexer. When
this option is selected, the relay will function just like a relay on any
relay board.
Restore Factory Settings
The wireless multiplexer can restore the factory defaults. To restore
the default settings, hold the program switch while connecting
power to the multiplexer. The display ask if you want to restore
the factory defaults. Select
YES
to restore the parameters to the
factory defaults. Remember to set the address and baud rate after
restoring the parameters.