PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 64 / 84

Wireless Door Alarm System
59 114A3873.D rev. 7-2017
Test the repeaters
Check that the wireless repeaters are working by looking at the
lights on the front of the repeater.
Remove the cover on the weatherproof enclosure. There are
five LED lights on the front of the repeater. The LED at the top
is labeled
AC
and should constantly lit.
See “Drawing 20: Repeater LEDs” on page 57.
If the power goes out, the LED labeled
BATTERY
will light
up.
When the repeater is working, the LED’s labeled
DECODE
and
TRANSMIT
blink periodically when the repeater is receiving
and relaying signals to receiver.
The LED labeled
NOT ACTIVE
only lights for a few seconds
after powering up the system
If the
NOT ACTIVE
light is on, try resetting power to the
wireless multiplexer