PTI security systems Wireless Door Alarm System, Инструкция по установке и эксплуатации

Страница: 66 / 84

Wireless Door Alarm System
61 114A3873.D rev. 7-2017
System Maintenance &
Troubleshooting
System Maintenance
The wireless door alarm system requires periodic maintenance.
When the recommended maintenance is performed regularly, the
system will provide the best possible security for your site.
Periodic Visual Inspection
Because the door transmitters are mounted on the outside of
doors, a visual inspection is very easy.
PTI recommends that all
door transmitters are inspected every month :
Look for visible signs of damage or wear. Check the doors to make
sure the magnets are still in alignment and there is no excessive
movement in the door.
Monitor the Door Activity Reports
The site manager should regularly go over the site activity reports
to look for unusual activity. Reports can be found in the access
control software.
For example, if a report shows an entry and an exit for a tenant but
does not show any door activity for the tenant’s unit, then the door
transmitter may not be functioning properly. Inspect and test any
door transmitters that may not be working properly.
Activity reports also show low battery alerts or a unit that is not
checking in. Physically check the individual transmitter involved.
Reports can be found in the access control software.