- 39 -
1900-EN Wartung_2723
MAINTENANCE
EN
Changing the bearing bush of the tine arms
TIP
Check the shaft (W) at least once a year at distance (A)
from the shaft.
• The distance (A) should be approx. 1 mm in normal
operation. If the shaft (W) clearance is greater, then it
can be corrected with shims.
• If the distance (A) is greater than 4 mmthen the bushes
(B) on the inside of the tine arms are to changed.
Otherwise subsequent damage may occur to the
machine.
Rotor unit
Curved track
1. Interval:
50 h
2. Implementation:
- Put the grease gun on the grease nipple (1)
- Turn the rotor to ensure that the grease is evenly
distributed
- Pump grease gun 3-4 times during a full rotation
- Make 3-4 full rotations
1
1
Drive of the rotary unit Refill grease
1. Interval:
if needed
The gearbox of the rotary unit is greased for lifetime.
Nevertheless, check once a year whether the cogs still
are covered.
2. Implementation:
1. Open oil filling screw (1). The crown wheel toothing
is easily visible when the filling screw is open.
2. Refill fluid grease in the filling plug(1)until the toothing
of the crown wheel is covered completely.
3. If necessary, suck away any excess fluid grease.
4. Close the filling plug (1)
1
3. Grease quantities:
Indicative quantities after the complete emptying of the
rotary unit:
TOP 612 C
~0.80 kg Mobilplex 44
TOP 702 C
~0.80 kg Mobilplex 44
TOP 762 C
~0.80 kg Mobilplex 44
TOP 762 C classic
~1.30kg Mobilplex 44
In principle, the same procedure as for "Complete Liquid
grease": Fill by eye and aspirate the excess grease.
