- 41 -
1900-EN Wartung_2723
MAINTENANCE
EN
Spring tines
Check the fixing bolts (S) of the spring tines after the first
10 hours of operation and re-tighten if necessary (tightening
torque: 100 Nm).
The outer tines are shorter and thicker.
The machine is equipped with a tine-loss security system.
This means that both external tines are joined to each other.
To replace either one of the external tines, the screw for
the other one must be removed as well.
Z
S
Disposal of old equipment
Take service-life expired equipment to a legally regulated
waste material recycling centre.
Raising the machine
The position (1) at which the jack may be used is indicated
by stickers on both stub axles, left and right.
