- 14 -
1801-GB_Tractor requirements_2723
EN
TracTor requiremen
T
T
Ts
T
T
Tractor
The following tractor requirements are necessary to operate
the machine:
- Tractor power:
TOP 762 C
TOP 762 C Classic
from 44 kW / 60 PS
from 44 kW / 60 PS
TOP 702 C
from 37 kW / 50 PS
TOP 612 C
from 30 kW / 40 PS
- Hitching:
Lower link Cat. II
- Connections:
see table “Necessary hydraulic and
power connections”
Ballast weights
Ballast weights
The front of the tractor must have sufficient ballast weights
to guarantee braking and steering capabilities.
DAN
DANgER
Risk of death or property damage due to incorrect
tractor balast.
•
The front axle of the tractor must always be
loaded with at least 20% of the tractor's tare
weight to guarantee the steering and braking
capacity of the tractor/trailer unit.
20%
Kg
lifting unit (three-point linkage)
371-08-16
371-08-16
- The tractor’s lifting unit (three-point linkage) must be
designed for the occurring load. (See technical data)
- The lifting struts are to be set at the same length (4)
using the appropriate adjusting device
(See the tractor manufacturer’s operating manual)
- Select the rear position if the lifting rods can be set in
various positions on the lower link. This relieves the
pressure on the tractor’s hydraulic system.
- The limiting chain or lower link stabilisers (5) are to
be set so that the attached machine CANNOT move
sideways. (Safety measure for transportation)
