- 49 -
1801-GB TECHN. DATA_2723
TECHNICAL DATA
EN
Intended use of the swath rotor
The rotary swather is intended solely for normal use in agricultural work.
• To rake green fodder, coarse fodder, wilted silage and straw.
Any other uses outside of these are regarded as not in accordance with the defined use.
The manufacturer accepts no liability for any damage arising as a result thereof. The user accepts sole responsibility.
• Use as intended also includes compliance with the manufacturer's stipulated maintenance and repair conditions.
Type plate
The chassis number is engraved on the type plate shown
opposite. Guarantee claims, enquiries and spare parts
orders cannot be processed without the chassis number.
Please enter the number on the title page of the Operating
Instructions immediately upon taking delivery of the vehicle/
equipment.
Optional equipment:
• Swath apron
• Working width adjustment mechanical / hydraulic (not for TOP 612 C)
• 16" outer jockey wheel
• Tandem tyres for rotor chassis
• 16" spare wheel for rotor chassis
• Electrohydraulic single rotor operation
• Flow divider
• Chassis wide (=2.90m wide)
• Chassis narrow (=2.55m wide)
• Chassis controlled (=2.55m wide) only TOP 612 C
Connections required
• 1 single-acting hydraulic plug connection with floating position (operating pressure at least: 150 bar / max.: 200 bar
• 7-pin connection for the lighting (12 volt)
Additional connections for optional equipment:
• with working width adjustment: 1 dual-action hydraulic plug connection
• with single rotor operation: 2-pin connection (12 volt)
Type plate position
The type plate (1) is located at the front of the machine, at
the rim after the mounting block on the right in the direction
of travel(see image)
1
