- 18 -
1800-DE_Anbau_2723
EN
AttA
Att
Att
ching the mA
ching the m
ching the m
chine
Adjusting the rotor stabilisation:
- Park the machine on flat, firm ground.
- Place the rotor in working position.
1. Adjust the end of the retaining spindle (1) of the
stabilisation spring compared to the end of the
adjustment bracket (2).
TOP 762 C / TOP 762 C classic/ TOP 702 C
1
2
TOP 612 C
1
2
Parking the machine
DAN
DANgER
life-threatening danger exists through unpredictable
tractor or machine movements
•
Park the machine only on firm, level ground.
•
Secure the tractor against unintentional
rolling.
•
Stop the engine.
•
Remove the key.
•
Secure the machine against tipping with
supports (1).
TIP
The machine can be parked in either the working position
or transport position.
- Switch engine off and remove ignition key.
- Control unit in floating position
- Unlock spring-loaded bolts (B)
- Swivel up support stand (5a) and allow to lock in
- Pull off cardan shaft (GW) and place on support.
- Disconnect hydraulic lines (DW) from tractor and place
on cable holder (6)
- Remove rope from tractor cabin
- Disconnect electric cable (EL) from tractor and place
on cable holder (6).
6
- Unhitch implement from tractor.
- Secure implement with the anti-theft device
1. Install anti-theft device on the mounting
2. Secure the anti-theft device with a padlock.
