EN
OperatiOn
1800_EN-Einsatz_2723
- 29 -
• Increase the distance to the tines for long chucks
to prevent the chuck from wrapping around and
blocking the feeler wheel.
NOTE
Property damage through the outer feeler wheel
colliding with the tractor when cornering. (only with
maximum extended feeler wheel)
•
Before operation, test whether the outer
feeler wheel collides with the tractor when
on full lock.
•
Alter the setting accordingly.
A
Aligning the indicators
Requirement:
Rake height of both rotors is set to the same height.
1. Align the height indicator (4) on both rotor units.
a. Open hose clip (5) underneath the rotor unit
b. Align indicator arrow of scale to that of the other
rotor unit.
c. Re-tighten hose clip (5).
4
5
The indicators should now show the same on the left
and right rotors.
Speed of cardan shaft
The maximum cardan shaft speed is: 540 rpm
The recommended cardan shaft speed is approx. 450 rpm
TIP
Reduce the speed of the PTO shaft if the work is not
clean (i.e: if the crop is torn back by the tines to the
already level area).
Swath apron
(Optional equipment for TOP 762C, TOP 762C classic,
TOP 702C)
Fitting the swath apron:
1. Attach the swath apron using 4 bolts on the bracket
under the gearing (1)
1
2. Attach the swath apron to the bracket (2)
2
3. Lock the bolt with nut (3) at the pivot point.
3
