EN
1800_EN-Einsatz_2723
- 25 -
operaTion
T
T
general guidelines on working with the
machine
DAN
DANgER
life-threatening danger exists through rotating rotors
and folding arms
•
Turn the rake off before leaving the cabin.
•
Switch off engine and remove ignition key
prior to any adjustment, maintenance or
repair work.
•
Only carry out work in the rotor area when
the PTO shaft is stationary.
•
Do not enter the rotor area while the drive
motor is running.
•
Before switching on the drive motor, make
sure that the working area is free and that
no one is in the danger zone.
495.173
WARNIN
WARNINg
Risk of serious injury due to thrown material and
stones
•
Ensure that nobody is in the danger area
before starting the rake.
•
Ensure that nobody is near the rake during
operation.
•
Stop work as soon as anybody enters the
danger zone.
TIP
Select a driving speed that ensures the entire crop is
harvested cleanly.
Conversion from transport to working
position
075-09-05
DAN
DANgER
life-threatening danger through machine tipping over.
•
Carry out the change from working position
to transport position, and vice versa, only on
level, firm ground!
DAN
DANgER
life-threatening danger exists through moving parts
when changing from transport to working position.
•
Make sure that the swivel range is clear and
that no-one is standing in the danger area.
•
Switch on the PTO shaft drive only after all
guards have been moved to the working
position.
•
Do not enter the danger zone yourself.
TIP
The rotors should be lowered in one go. If stopped in the
meantime, undefined lifting and lowering movements of
individual rotors may occur.
1. lowering the rotor
- Using the single-action servo, raise the rotor briefly to
release the transport safeguard (10).
10
- Pull the rope to raise the transport safeguard (10).
- With the single-action servo in the float position, lower
the rotor completely
- Release rope
