EN
TransporT
1800_DE-TRANSPORT_2723
- 22 -
Reducing the transport height
Perform the following steps to reduce the transport height:
TIP
Always reduce the transport height when using 15.0/55-
17 tyres. From this tyre dimension onwards, the device
exceeds the maximum legal transport height.
1. In working position: Remove the top three tine arms
of both rotors. The tine arms are each secured with
a spring linchpin. Store the tine arms removed in the
holder provided at the rear of the implement. The tines
should face the direction as shown in the Figure right.
TOP 762 C / TOP 762 C classic / TOP 702 C
TOP 612 C
NOTE
Risk of material damage due to loss of tines.
•
Observe the direction of rotation of the
tines and the spring pins when attaching
the tines. The spring pin must close in the
rotation direction.
TIP
When reattaching the tines, observe the direction of ro-
tation of the tines and the spring pins. The spring cotter
pin must be closed in the direction of rotation.
2. Folding out the safety bar: First remove the spring
linchpin (from opening 1) and fold the safety bar back
completely. Then re-secure using the spring linchpin
(opening 2).
1
2
3. Move to transport position using control unit.
