70
07 Function for Commercial Use
Executing a Command Stack
1. Entering the execute mode
To enable the
Command Stack
execute mode, from the
SETUP
menu’s [
Play Mode
] select [
Command Stack
] and
press either
ENTER
or the remote control unit’s
RECALL
button.
Important
¶
To execute a Command Stack, it is necessary that a DVD
disc be loaded in the player.
Group001
Group002
001 01:000301-000601
Command Stack
Group
Command(1-001)
Move
Play
Exit
SETUP
2. Executing the Command Stack
2.1 To consecutively execute all commands
within a group
Place the cursor over the [Group] command and
press Play (
3
), or place the cursor over [Command
001] and press either the Play (
3
) or ENTER but-
ton.
2.2 To execute one of the group’s commands
as a single step
Place the cursor over the desired command and
press the Step (
E
) button.
¶
Each time the
Step
(
E
) button is pressed, the next com-
mand in sequence will be executed.
Group001
Group002
001 01:000901-001201
002 01:001501-001801
003 REPEAT
Command Stack
Group
Command(1-003)
Move
Play
Exit
Step
SETUP
Note
¶
Command Stacks can also be invoked by using the
[
WEEKLY TIMER
] (page 57) or [
POWER ON START
] (page
60).
4. Ending input and saving data
When ending input following correction of a command stack,
a confirmation message [
Save changes ?
] will appear.
To save the changes, place cursor on [OK] and
press the ENTER button.
Group001
001 PLAY
002
003
004
005
006
007
008
Command Stack
Group(1-001)
Command(1-001)
Move
Save changes ?
Select
ENTER
Exit
SETUP
OK CANCEL RETURN
To discard changes, place cursor on [CANCEL]
and press the ENTER button.
Group001
001 PLAY
002
003
004
005
006
007
008
Command Stack
Group(1-001)
Command(1-001)
Move
Save changes ?
Select
ENTER
Exit
SETUP
OK CANCEL RETURN
To return to the original input menu, place cursor
on [RETURN] and press the ENTER button.
Group001
001 PLAY
002
003
004
005
006
007
008
Command Stack
Group(1-001)
Command(1-001)
Move
Save changes ?
Select
ENTER
Exit
SETUP
OK CANCEL RETURN
