Pavone Systems MCT 1302, Техническое руководство, Страница: 81 / 84

Page 79
59-60 29 Fine output INT value for archive management from fieldbus
61-62 30 Fast logic output INT value for archive management from fieldbus
63-64 31 Fine logic output INT value for archive management from fieldbus
65-66 32 Entrance INT value for archive management from fieldbus
67-68 33 Spill time ON INT value for archive management from fieldbus
69-70 34 Spill time OFF INT value for archive management from fieldbus
71-72 35 InInflight correction INT value for archive management from fieldbus
73-74 36 Fine reactivation INT value for archive management from fieldbus
75-76 37
Number of recipes in the
archive
INT value for archive management from fieldbus
77-78 38
Number of activities in the
archive
INT value for archive management from fieldbus
WRITING EXAMPLES
To write the Set-up parameters, follow the example below:
In bytes 1-2 (Command Register) write the value HEX 3FFF that opens the internal writing area of the
MCT 1302.
Example: You want to change the values of Set-Point 1 and Set-Point 2 to 120 and 9740 respectively.
Set-Point 1 Byte 21 Byte 22
Hex 00 78
Set-Point 2 Byte 23 Byte 24
Hex 26 0C
Save the data by writing the HEX value 7 in the Byte 1-2
N.B. The instrument does not accept writing a value equal to the value already present.