Pavone Systems MCT 1302 Скачать руководство пользователя страница 32

Страница: 32 / 84

Page 30

Fine output

This parameter allows you to set

the Fine output associated with

this activity (the same output can

be shared by several activities).

By programming this parameter to

zero, no fast output is associated

with the activity. Parameter used

in case of "activity type” =

AUTO

DOS./ MAN DOS./ TOT. UNL. /

INT. UNL / TIMER / OUTPUT.

Numeric setup

0÷32

0269

Coarse

output logic

Operation logic of fast output.

Parameter used in case of "activity

type” =

AUTO DOS./ MAN DOS./

TOT. REJ. / INT. REJ / TIMER /

OUTPUT.

Selection

[0] OPEN NO.

[1] CLOSE NO.

0270

Fine output

logic

Operation logic of Fine output.

Parameter used in case of "activity

type” =

AUTO DOS./ MAN DOS./

TOT. UNL. / INT. UNL / TIMER /

OUTPUT.

Selection

[0] OPEN NO.

[1] CLOSE NO.

0271

Input

This parameter allows you to

associate an input to the activity.

Parameter used in case of "activity

type” =

MAN. DOS. / TOT. UNL.

(only if the parameter END Batching

MODE = CONFIRM)

/ INT. UNL.

(only if the parameter END Batching

MODE = CONFIRM)

/ EXP. CONF.

/ INPUT.

Numeric setup

0÷22

0272

Spill ON

This parameter acts only if

programmed the tolerance

parameter. In case of batching

weight less than the weight value

- tolerance, the fine output is

reactivated for the time set in this

parameter. If the final weight value

is reached before the expiration

of this time, the fine output is still

disabled.

Numeric setup

Seconds

0.0÷999.9

0273

Spill OFF

At the end of the reactivation of the

fine output, if the batching weight

has not yet reached the set value,

the instrument checks during the

time set in this parameter that the

batching weight has been reached.

Otherwise, reactivate the fine

output.

Numeric setup

Seconds

0.0÷999.9

0274

(*)

Each activity can be associated with one of the following functions:

• Automatic batching:

Automatic batching under the load.

• Manual batching:

Manual batching; to end this activity, the operator must press the confirmation

key or close the selected input.

• Total unloading:

complete unloading; the scale is considered as unloaded when the gross weight

is lower than the programmable set point of unloading weight.

Содержание MCT 1302





















































































Результаты поиска

Содержание MCT 1302

Отзывы:

Pavone Systems MCT 1302, Техническое руководство, Страница: 32 / 84

Результаты поиска

Содержание MCT 1302

Отзывы: