manualshive.com logo in svg

Pavone Systems MCT 1302, Техническое руководство, Страница: 74 / 84

Поделиться
Скачать
Pavone Systems MCT 1302 Скачать руководство пользователя страница 74

Page 72

0x000F Print command.

0x0010 Reading the recipe parameters.

Recipe index in MSB and 

LSB

The general recipe parameters (name 

and number of steps) and the parameters 

related to step 1 of the recipe are read. See 

registers from 0202 to 0212.

0x0011 Saving the recipe parameters.

Recipe index in MSB and 

LSB

Registers 0202 to 0209 are programmed 

in the recipe specified in the Data Register. 

If the change also concerns the recipe 

steps, the recipe steps must first be saved by 

command

0x0012 Reading the recipe step.

Recipe step in LSB

The "activity” registers (0210) and the 

"batching setpoint" registers (0211-0212) 

are updated with the values of the step 

specified in the Data Register.

0x0013 Saving the recipe step. 

Recipe step in LSB 

The step specified in the Data Register is 

programmed with the values written in the 

"activity” (0210) and "batching setpoint" 

registers(0211-0212). To save the changes 

in permanent memory, it is necessary to send 

the command 0x0011, which can be sent 

only once at the end of the recipe changes. 

0x0014  Reading the activity parameters. 

Activity index in LSB 

See registers from 0252 to 0274. 

0x0015  Saving the activity parameters. 

Activity index in LSB 

See registers from 0252 to 0274. 

0x0016  Reading the recipe total. 

Recipe index in MSB and 

LSB 

The total of the recipe specified in the Data 

Register is read. See registers from 0301 to 

0302. 

0x0017  Reading the activity total. 

Activity index in LSB 

The total of the activity specified in the Data 

Register is read. See registers from 0303 to 

0304. 

0x0018  Delete the recipe total. 

Recipe index in MSB and 

LSB 

The total of the recipe specified in the Data 

Register is deleted. Write 0xFFFF in the Data 

Register to delete the totals of all the recipes. 

0x0019  Delete the activity total. 

Activity index in LSB 

The total of the activity specified in the Data 

Register is deleted. Write 0xFFFF in the 

Data Register to delete the totals of all the 

activities. 

0x001A Delete recipe 

Recipe index in MSB and 

LSB 

The  recipe specified in the Data Register is 

deleted.

0x001B Delete activity

Recipe index in MSB and 

LSB

The  recipe specified in the Data Register is 

deleted.

0x001C Reset the batching alarm 

- 

- 

0x001D  Start batching. 

- 

- 

0x001E  Pause batching. 

- 

- 

0x001F  Restart batching. 

- 

- 

0x0020  Stop batching. 

- 

- 

0x3FFF Enabling the Output Data Area (*)

(*) The instrument parameters managed in the Fieldbus Output Data Area are not changed until this 

command is sent. When the instrument is switched on, the Output Data Area is completely zeroed, 

so the Fieldbus master must read the parameter values from the Input Data Area and copy them to 

the relevant Output Data Area registers, and then it must send the enable command to the Command 

Register. Otherwise, all the parameters managed in the Output Data Area would be reset at power 

up.
(***) The instrument is in the setup phase (TRUE flag during access to the SETUP menu of the 

instrument or during connection with PC software “Optimation”).

Содержание MCT 1302





















































































Отзывы:

Нет отзывов