manualshive.com logo in svg

Pavone Systems MCT 1302, Техническое руководство, Страница: 5 / 84

Поделиться
Скачать
Pavone Systems MCT 1302 Скачать руководство пользователя страница 5

Page 3

INTRODUCTION

The MCT 1302 is a touch screen weight indicator and batcher to be combined with load cells to meet 

the industrial applications.
The instrument is installed in a frame in a slot having a drilling template of 138 x 53 mm and is secured 

by means of the 2 tensioning screws supplied.
The MCT 1302 uses the RS232 serial port with ASCII protocols, to be connected to the PC, PLC and re-

mote units with a maximum distance of 15m beyond which it is necessary to use the RS422/RS485 serial 

output that allows the connection also with MODBUS RTU protocol up to 32 addressable instruments.
The availability of the most popular field buses, as an alternative to the RS485 port, also allows inter-

facing the instrument with any supervision device currently offered by the market.
A USB 2.0 port is also available and facilitates interfacing with PCs using AN Utility Software available 

in the kit.
6 digital inputs and 6 digital outputs configurable by Set-up are always available.
It is also possible to have the analog output in voltage or current even in the presence of the FIELDBUS.
Available versions:

•  MCT 1302:

 weight indicator with RS232 serial output, USB, RS485. The supported protocols are 

continuous Modbus RTU.

•  MCT 1302/A:

 version with analog output.

•  MCT 1302/PROFINET:

 weight indicator with RS232, USB and PROFINET serial output.

•  MCT 1302/ETHERNET IP:

 weight indicator with RS232, USB and ETHERNET IP serial output.

•  MCT 1302/ETHERCAT:

 weight indicator with RS232, USB and ETHERCAT serial output.

•  MCT 1302/PROFIBUS:

 weight indicator with RS232, USB and PROFIBUS serial output.

The analog output can also be present with the FIELDBUS option 

Содержание MCT 1302





















































































Отзывы:

Нет отзывов