Pavone Systems MCT 1302, Техническое руководство, Страница: 38 / 84

Page 36
Batch. End mode
In the case of CONFIRM selection,
at the beginning of the total
unloading activity, the net weight
batched in the recipe is displayed.
To activate the unloading output,
the operator must press the
confirmation key or close the input
set in the activity.
Selection
0
[0] NORMAL
[1] CONFIRM
0109
Corr
. mode
In case of FACTOR selection,
the correction of the recipe
is performed by entering a
multiplication factor of the sets
(from 0.01 to 10.00). In the case of
WEIGHT selection, the correction of
the recipe is performed by entering
the total weight value that you wish
to batch; the recipe sets will be
automatically recalculated to obtain
the desired total.
Selection
0
[0] FACTOR
[1] WEIGHT
0110
Minimum
level
This parameter represents the
minimum level set point compared
to the gross weight. The minimum
level output activates when the
weight is lower than the set value.
Numeric
setup
0
0÷Load Cell
capacity
0111
(MSW)
-
0112
(LSW)
Maximum
level
This parameter represents the
maximum level set point compared
to the gross weight. The maximum
level output activates when the
weight is greater than the set value.
Numeric
setup
0
0÷Load Cell
capacity
0113
(MSW)
-
0114
(LSW)
Min. level
output
Output associated with the minimum
level value. "NA" operating logic,
activated when the gross weight is
lower than the minimum level set
point. In the case of a parameter set
to 0, no output is associated.
Numeric setup
0 0÷32 0115
Max. level output
Output associated with the
maximum level value. "NA"
operating logic, activated when
the gross weight is greater than the
maximum level set point. In the case
of a parameter set to 0, no output is
associated.
Numeric setup
0 0÷32 0116
Cycle output
Output associated with the
execution of a batching cycle.
"NA" operating logic, it is activated
with the start of the batching
and deactivated at the end of
the batching. In the case of a
parameter set to 0, no output is
associated.
Numeric setup
0 0÷32 0117