Pavone Systems MCT 1302, Техническое руководство, Страница: 72 / 84

Page 70
1502 Analog tare (LSW) R/W Value INT. - Less significant word
1503 Analog full scale (MSW) R/W Value INT. - Most significant word
1504 Analog full scale (LSW) R/W Value INT. - Less significant word
1505 Analog output mode R/W See match on page 35
1506 Analog output range R/W See match on page 35
1507 Analog zero adjustment R/W
Value INT. Points of zero of the analog output; to end
the adjustment procedure it is necessary to send the
command to save data in permanent memory in the
Command Register.
1508 Analog full scale adjustment R/W
Value INT. Points of full scale of the analog output; to
end the adjustment procedure it is necessary to send
the command to save data in permanent memory in the
Command Register.
2000 Monitor register W
The programmed value is automatically copied to the
Monitor Register (2100).
2100 Monitor register R
TABLE A - CODING THE STATUS REGISTER
BITS 15 14 13 12 11 10 9 8
Description Setup (***)
Weight
delta
0 0 0
0= Net displayed
1= Gross displayed Run backup
0
BITS 7 6 5 4 3 2 1 0
Description
Not
calibrated
Weight
error
Overload
Under-
load
Tare
entered
Zero
band
Stable
weight
Zero
center
TABLE B - CODING THE INTERNAL DIGITAL INPUTS/OUTPUTS OF MCT 1302
BITS 15÷6 5 4 3 2 1 0
Description Reserved
In 6 - Out 6
ON
In 5 - Out 5
ON
In 4 - Out 4
ON
In 3 - Out 3
ON
In 2 - Out 2
ON
In 1 - Out 1
ON
WARNING: bits 15 to 4 are not managed and always are equal to 0.