Paradyne 7110 Скачать руководство пользователя

Страница: 120 / 167

MIB Descriptions

C-9

7110-A2-GB20-00

June 1997

Extension to Interface Table (ifXTable)

This extension contains additional objects for the interface table. Supports only
the following objects.

Table C-3.

Extension to Interface Table (ifXTable)

Object, OID, Access

Description

Setting/Contents

ifName

(ifXEntry 1)

1.3.6.1.2.1.31.1.1.1.1
read-only

Provides name of the
interface.

Interface text strings:

Management Port

Terminal Port

Network

Data Port

FDL

ifLinkUpDown-
TrapEnable
(ifXEntry 14)]

1.3.6.1.2.1.31.1.1.1.14
read-write

Indicates whether the link is
up or down, or enterprise-
specific traps should be
generated.

Only supports T1 network
and User data port.

SNMP Traps must be
enabled for the unit. See

SNMP Traps Option

Table A-13.

ifHighSpeed
(ifXEntry 15)

1.3.6.1.2.1.31.1.1.1.15
read-only

Reflects the ifSpeed setting
for the interface.

Supported as a read-only
variable.

This object is supported for
the Network T1,
Management Port, and
User Data Port only.

0 – ifSpeed from 0 to
499,999 bps

1 – ifSpeed from 500,000 to
1,499,999 bps

2 – ifSpeed from 1,500,000
to 1, 536,000 bps

ifConnectorPresent
(ifXEntry 17)

1.3.6.1.2.1.31.1.1.1.17
read-only

Indicates whether there is a
physical connector for the
interface.

true(1) – Will always have
this value for the Network
T1, Management port, and
User Data port.

false(2) –Will always have
this value for the FDL.

Содержание 7110


































































































































































Результаты поиска

Содержание 7110

Отзывы:

Похожие инструкции для 7110

Бренды по названию

Популярные бренды

Paradyne 7110, Руководство пользователя

Результаты поиска

Содержание 7110

Отзывы:

Похожие инструкции для 7110

Бренды по названию

Популярные бренды