Panasonic WJND400 - NETWORK DISK RECORDER, Руководство по эксплуатации

Страница: 107 / 233

About Connectors
3 8
*The error output timing is set under [Basic] on the settings menu (refer to the Setup Instructions (PDF file)).
Note:
• During L active (Lo w active), the logic is ena b led w hen the signal ' s voltage level is Lo w .
• During H active (High active), the logic is ena b led w hen the signal ' s voltage level is High.
Alarm/Control connector and Alarm Connector Timin g and Polarity
Connectors Active Time Remarks
Alarm input 100 ms or more L active
Alarm output The time set on the setup menu L active
Net w ork error output Until the net w ork error is cleared, or until the [ERR] b utton on
the operation w indo w ( b ro w ser) is clicked.
L active
Alarm reset input 100 ms or more L active
Emergency recording input 100 ms or more L active
Availa b le disk space w arning output From the time of the error occurrence until the time of the
error output duration
*
L active
HDD error output From the time of the error occurrence until the time of the
error output duration
*
L active
Camera error output From the time of the error occurrence until the time of the
error output duration or the camera is reset
*
L active
Error output From the time of the error occurrence until the time of the
error output duration
*
L active
Time adjustment input/output Input: 100 ms or more
Output: 1 s Input/Output:
L active
Alarm suspension input 100 ms or more L active, judged level
External recording mode s w itching 100 ms or more L active
Outage detection input 5 s or more L active
Po w er outage recovery completion
output
10 s or more H active
ND400_Basic.book 38 ページ ２００８年７月１０日 木曜日 午前１０時５０分