Panasonic WJND400 - NETWORK DISK RECORDER, Руководство по эксплуатации

Страница: 180 / 233

Camera
51
4
Check or change the items you want.
Refer to “NW camera settings 2” table for details about the
settings.
5
Click the [Set] button.
NW camera settings 2
♦
Initial default
Note:
• When the set camera is disconnected, [CONNECT ERROR] is displayed. In this case, [Model/Compression] is set as [--] for the removed
camera on the network camera registration window. Delete the address in [Address].
• If the camera cannot be connected with, the reasons are displayed in the thumbnail. The primarily displayed contents are as follows.
Item Settings Description
Manufacturer Panasonic
♦
/ Axis Specifies the camera manufacturer.
Model/Compression --
♦
Model/JPEG
Model/M-JPEG
Model/MPEG4
Specifies the camera model and image compression format.
Refer to the "readme.txt" file on the CD-ROM for details about
camera's model number.
Changing the compression format automatically changes the
live video and recording rate settings. If you change the setting,
reconfigure the rate setting (page 42).
•
Changing from MPEG-4 to JPEG or M-JPEG will change the
rate setting to [1ips].
• Changing from JPEG or M-JPEG to MPEG-4 will change the
rate setting to [I-Frame].
• Changing the compression mode and non-compression
mode items at the same time will change the rate setting to
[Off].
Address Address input (Blank
♦
) For entering the address of the camera
Port number Port number input ( 8 0
♦
) For setting the HTTP port used by the camera in the range of 1
to 65535.
Group G1
♦
to G 8 Specifies the group to which the camera belongs.
Camera title Title input
(Camera 1:1
♦
to
Camera 64:64
♦
)
Specifies the camera title, which is displayed on the [Cam.
select] box, etc.
•
The camera title can be made up of up to 16 single-byte
numerals and symbols, or 16 two-byte characters. The
following characters are not allowed as symbols.
"!$%'<=>@[\]^_`{|}~"
User name Name input
(Blank
♦
)
Specifies the user name for accessing a camera and logging in.
•
The password can be up to 32 single-byte characters long.
Password Enter password
(Blank
♦
)
Specifies the password for accessing a camera and logging in.
•
The password can be up to 32 single-byte characters long.
Time zone GMT-12:00 to GMT+13:00
NTSC model : (GMT-5:00
♦
)
PAL model : (GMT+0:00
♦
)
Specifies the time zone of the camera.
Item Description
CONNECT ERROR Could not communicate with the camera.
ATTEST ERROR Camera user authentication failed.
DNS ERROR The DNS server cannot resolve the camera address.
CAMERA ERROR The response from the camera is incorrect.
PROXY(CONNECT) ERROR Cannot connect with the proxy server.
PROXY(DNS) ERROR Cannot resolve the proxy server address.
PROXY(CAMERA) ERROR The response from the proxy server is incorrect.