8
About operating windows
Operate the recorder from a web browser on a PC.
1
Start the PC.
2
Launch the web browser.
3
Enter the URL or IP address set for the recorder into the
address box and press the [Enter] key.
The authentication window is displayed.
•
If [User authentication] is [Off], the authentication window
does not open (refer to the Setup Instructions (PDF file)).
4
Enter a "User name" and "Password" that is registered
with the recorder, and click the [Login] button.
The top page is displayed.
Display and close the operating window
Important:
•
Refer to your system administrator about the IP address
settings.
•
If the [Host authentication] is [On] (refer to the Setup
Instructions (PDF file)), only PCs that have an IP address that
is registered with the recorder can connect to the recorder.
For more information, contact your system administrator.
•
Do not enter "0" on the front of the IP address when inputting
it.
Example:
OK: 192.16
8
.0.50
NG: 192.16
8
.0.050
•
Refer to page 64 if a message appears in the information bar.
Important:
•
Refer to your system administrator for the user name and
password set for you.
Refer to the Setup Instructions (PDF file) for information about
user registration.
•
The default user name and password settings are shown
below.
User name: ADMIN
Password: 12345
•
To ensure security, change the ADMIN password before
starting operations. Also, change the password periodically.
Refer to the Setup Instructions (PDF file) for information about
changing passwords.
•
When the unit is being operated without changing the default
administrator name and password, the pop-up window saying
that it is recommended to change the password will be
displayed.
Содержание WJND400 - NETWORK DISK RECORDER
Страница 73: ...4 ...
