Panasonic WJND400 - NETWORK DISK RECORDER Скачать руководство пользователя страница 200

Страница: 200 / 233

User management

The following procedure is to register information for PCs (hosts) that can access the camera over a network.

Up to 32 hosts can be registered.

Click the [User mng.] button on the setup menu.

On the sub-menu that appears, click [Host].

This will display the "Host setting" window.

Configure the settings for each item.

Refer to “Host settings” table for details about the settings.

Click the [Set] button.

Host settings

♦

Initial default

Note:

•

Clicking the [Registration] button does not log out other users.

Hosts

Item

Settings

Description

Host IP address

Address input (Blank

♦

)

Enter the IP address.
•

Enter single-byte numerals in the range of 0 to 255.

•

You can use the "*" special character to represent any
number.

•

"0.0.0.0" or "*.*.*.*" cannot be registered.

Level

LV1

♦

/ LV2 / LV3 / LV4

Specifies the user level.
•

For operations that can be performed at each level, refer to
"User level (page 73)".

Access priority

♦

to 16

Specifies the priority sequence for operations when multiple
users are logged in on the recorder at the same time.

Default screen

[Cam.1]

♦

to [Cam.64] / [Cam.1-4]

/ [Cam.5-

] / to / [Cam.61-64] /

[Seq]

Specifies the live image display immediately after log in.
•

Selecting [Cam.1] to [Cam.64] displays the images of the
selected cameras on a 1-image screen.

•

Selecting [Cam.1-4] to [Cam.61-64] displays the live images
of the selected cameras on a 4-image screen.

•

Selecting [Seq] displays images in a specified sequence.

Camera partitioning

[View/Operate]

♦

/ [View] / [--]

Specifies the scope of control for each camera channel.
•

When [View/Operate] is selected, live/recorded image
display or camera operation can be performed.

•

When [View] is selected, live/recorded image display can be
performed, but camera operation cannot.

•

When [--] is selected, neither live/recorded image display nor
camera operation can be performed.

Important:

•

You must click press the [Set] button to activate settings on the recorder when registering, editing, or deleting hosts.

Содержание WJND400 - NETWORK DISK RECORDER










































































































































































































































Результаты поиска

Содержание WJND400 - NETWORK DISK RECORDER

Отзывы:

Похожие инструкции для WJND400 - NETWORK DISK RECORDER

Бренды по названию

Популярные бренды

Panasonic WJND400 - NETWORK DISK RECORDER, Руководство по эксплуатации

Результаты поиска

Содержание WJND400 - NETWORK DISK RECORDER

Отзывы:

Похожие инструкции для WJND400 - NETWORK DISK RECORDER

Бренды по названию

Популярные бренды