Panasonic WJND400 - NETWORK DISK RECORDER, Руководство по эксплуатации

Страница: 91 / 233

22
Installation and Setup
Gettin g Started
The procedure to start operations is sho w n b elo w .
Setup Procedure
1
Rack Mountin g Mount the recorder into the rack (page 23).
Go to step 2 if you are not using a rack.
2
Connections
Connect the recorder to the various devices (page 25).
3
Power On
Turn on the recorder (page 39).
W hen using extension units, turn on all extension units b efore turning on
the recorder.
4
Installin g HDDs
Install the HDDs in the recorder (page 46).
Unformatted HDDs inserted into the recorder are automatically initialized.
Also, set the HDD operation mode as necessary (page 51).
5
Recorder Network Settin g s
Use the b uttons on the recorder ' s front panel to do the net w ork settings
(refer to the Setup Instructions (PDF file)).
6
PC Network Settin g s
Change the PC ' s net w ork settings to match the recorder ' s settings (refer to
the Setup Instructions (PDF file)).
7
Initialize HDDs
To change HDD space management, display disk configuration and
initialize the HDD from the settings menu on the recorder as needed (refer
to the Setup Instructions (PDF file)).
8
Camera Network Settin g s
Open the PC settings menu from the PC and do the net w ork settings (refer
to the Setup Instructions (PDF file)).
9
Setup
Set up the functions that you need (refer to the Setup Instructions (PDF
file)).
10
Start Operations
W hen necessary
Replace HDDs
You can change or format HDDs w hile the recorder is [On] (page 46 to
page 53).
ND400_Basic.book 22 ページ ２００８年７月１０日 木曜日 午前１０時５０分