Panasonic WJND400 - NETWORK DISK RECORDER Скачать руководство пользователя страница 116

Страница: 116 / 233

Usin

the Front Panel for Operations

Select [YES] with the arrow buttons (left or ri

ht) and

then press the [SET] button.

The HDD is recognized for recording.

Press the [SET]

utton to return to the display format screen.

Close the front cover and lock it by li

htly pressin

and

turnin

the key to the left.

Keep the key in a safe place.

Check the available disk space.

Check the follo

ing content related to the HDD under [Disk

information] on the settings menu. Refer to the Setup
Instructions (PDF file) for more information.

•

HDD capacity

•

HDD remaining capacity

•

Hour meter

•

Disk operation mode

•

Date range of video recorded on the HDD

Note:

•

HDDs cannot

e added

hile in RAID5 or RAID6 mode.

The RAID function

ill not start even if an HDD is installed

(linked) in an empty disk slot.

All the HDDs in one extension unit can

e linked to operate at the

same time. For details refer to the operating instructions for the
extension unit.

Install the HDD units in the extension unit.

Install the HDDs in the extension unit according to steps 1 to
2 in "Installing HDDs (page 46)" to install HDDs.
Repeat steps 1 to 2 to install multiple HDD units.

Note:

•

hen installing HDD units, each HDD unit must

e recognized.

(Follo

Step 1 and 2)

Additional HDD units

ill not

e recognized

hile the first unit is

eing recognized.

The HDD is automatically reco

nized.

•

hile the HDD is

eing recognized, the HDD status

indicator

links orange.

Once the HDD is recognized, the HDD status indicator
lights green or

links.

•

The HDD is automatically formatted if it is not
preformatted.

The HDD status indicator lights green after formatting is
complete.

•

Preformatted HDDs are recognized for play

ack only. In

this case, the HDD status indicator

links green. Follo

the instructions from step 3 to use the HDD for recording.

Press the [USE] button for over 2 seconds.

uzzer sounds.

Press the front panel

uttons according to the directions on

the LCD.

Press the arrow buttons (up or down) on the front panel
until [HDD Operate] appears on the screen.

Press the [SET] button.

Press the arrow buttons (up or down) on the front panel
until [Link EXT] appears on the screen.

(2)

(1)

Installin

HDDs by unit

ND400_Basic.book 47 ページ２００８年７月１０日　木曜日　午前１０時５０分

Содержание WJND400 - NETWORK DISK RECORDER










































































































































































































































Результаты поиска

Содержание WJND400 - NETWORK DISK RECORDER

Отзывы:

Похожие инструкции для WJND400 - NETWORK DISK RECORDER

Бренды по названию

Популярные бренды

Panasonic WJND400 - NETWORK DISK RECORDER, Руководство по эксплуатации

Результаты поиска

Содержание WJND400 - NETWORK DISK RECORDER

Отзывы:

Похожие инструкции для WJND400 - NETWORK DISK RECORDER

Бренды по названию

Популярные бренды