Basics
32
Use the following procedure to set the current time and date.
1
Click the [Basic] button on the setup menu.
2
On the sub-menu that appears, click [Time & date].
This will display the "Time display format" window.
3
Configure the settings for each item.
Refer to “Time display format” table for details about the
settings.
4
Click the [Set] button.
Time display format
Time & date
Item
Settings
Description
Date display format
YY.MM.DD
/ MMM.DD.YY
/ DD.MMM.YY
NTSC model : MMM.DD.YY
♦
PAL model : DD.MMM.YY
♦
Specifies the date format.
Example: April 1, 200
8
•
Selecting [YY.MM.DD] displays the date as [0
8
.04.01].
•
Selecting [MMM.DD.YY] displays the date as [APR.01.0
8
].
•
Selecting [DD.MMM.YY] displays the date as [01.APR.0
8
].
Time display format
24 h / 12 h
NTSC model : 12 h
♦
PAL model : 24 h
♦
Specifies the time format.
Example: 3:00 p.m.
•
Selecting [24h] displays the time as [15:00].
•
Selecting [12h] displays the time as [3:00 PM].
Time & date
0
8
to 34 (year)
/ Jan to Dec (month)
/ 1 to 31 (day)
/ 0 to 23 (hour)
/ 0 to 59 (minute)
Sets the current time and date.
Configure the year / month / day / hour / minute settings, and
then click the [Set] button. Timekeeping starts from the time you
set, the moment you click the [Set] button.
Time zone
GMT-12:00 to GMT+13:00
NTSC model : (GMT-5:00
♦
)
PAL model : (GMT+0:00
♦
)
Specifies the time zone of the recorder.
Auto adjustment time
Off
♦
/ Slave / Master
Specifies the auto time adjustment method.
•
Selecting [Slave] specifies that the recorder's time should be
adjusted in accordance with an externally input time. The
time is adjusted automatically in accordance with a signal
input from the alarm/control terminal on the rear panel of the
recorder.
•
Selecting [Master] specifies that the time of other devices
should be adjusted in accordance with the recorder. A signal
is output from the alarm/control terminal on the rear panel of
the recorder and sent to other devices.
Содержание WJND400 - NETWORK DISK RECORDER
Страница 73: ...4 ...
