Panasonic WJND400 - NETWORK DISK RECORDER Скачать руководство пользователя страница 115

Страница: 115 / 233

Usin

the Front Panel for Operations

You can install HDDs from the recorder

hile it is in operation.

Insert the key (included) into the key hole and turn it to
the ri

ht while pressin

ently to open the front cover.

Insert the HDD units into the HDD bay slots while
checkin

each HDD number marked on the HDD bay

slots.

Press the HDD unit

s removal kno

n and lift the lever,

and then insert it all the

ay into the disk slot.

(1)

Hook the HDD unit's tab securely on the
HDD bay slot.

(2)

Press the lever down and push the HDD
unit until the removal knob clicks.

The HDD is automatically reco

nized.

•

hile the HDD is

eing recognized, the HDD status

indicator

links orange.

Once the HDD is recognized, the HDD status indicator
lights green or

links.

•

The HDD is automatically formatted if it is not
preformatted.

The HDD status indicator lights green after formatting is
complete.

•

Preformatted HDDs are recognized for play

ack only. In

this case, the HDD status indicator

links green. Follo

the instructions from step 4 to use the HDD for recording.

Note:

•

The HDD status indicator may light green

efore

linking

orange

hen an HDD is inserted.

Press the [USE] button for over 2 seconds.

uzzer sounds.

Press the front panel

uttons according to the directions on

the LCD.

Press the arrow buttons (up or down) on the front panel
until [HDD Operate] appears on the screen.

Press the [SET] button.

Press the arrow buttons (up or down) on the front panel
until [Link HDD] appears on the screen.

Select [YES] with the arrow buttons (left or ri

ht) and

then press the [SET] button.

Select the device where you installed the HDD
(Recorder: MAIN, Extension unit x: EXTx) with the arrow
buttons (up or down) and press the [SET] button.

Select the device where you installed the HDD with the
arrow buttons (up or down) and press the [SET] button.

Installin

HDDs

(1)

(2)

(1)

(2)

ND400_Basic.book 46 ページ２００８年７月１０日　木曜日　午前１０時５０分

Содержание WJND400 - NETWORK DISK RECORDER










































































































































































































































Результаты поиска

Содержание WJND400 - NETWORK DISK RECORDER

Отзывы:

Похожие инструкции для WJND400 - NETWORK DISK RECORDER

Бренды по названию

Популярные бренды

Panasonic WJND400 - NETWORK DISK RECORDER, Руководство по эксплуатации

Результаты поиска

Содержание WJND400 - NETWORK DISK RECORDER

Отзывы:

Похожие инструкции для WJND400 - NETWORK DISK RECORDER

Бренды по названию

Популярные бренды