Server
56
Use the following procedure to send images from a camera connected to the recorder to a specified FTP server.
1
Click the [Server] button on the setup menu.
2
On the sub-menu that appears, click [FTP].
This will display the "FTP Setup" screen.
3
Configure the settings for each item.
Refer to “FTP settings” table for details about the settings.
4
Click the [Set] button.
FTP settings
FTP
Item
Settings
Description
FTP server address
Address input
(Blank
♦
)
Enter the name or IP address of the FTP server where images
are sent.
•
Enter up to 255 single-byte alpha-numeric characters,
including hyphen (-) and period (.).
•
When entering a server name, you must use the DNS.
User name
Name input
(Blank
♦
)
Enter the user name (log in name) for accessing the FTP
server.
•
Enter up to 32 single-byte alpha-numeric characters and
symbols, excluding ampersand (&) and spaces.
Password Enter
password
(Blank
♦
)
Enter the password for the above user name.
•
Enter up to 32 single-byte alpha-numeric characters and
symbols, excluding ampersand (&) and spaces.
Mode
Active / Passive
♦
Specifies the mode when sending images to the FTP server.
•
When send is not possible with [Passive], change to [Active].
Image transmission by periodic timer
Set the following items to periodically transmit live images.
Setting whether or not to transmit live images to the FTP server
can be set for scheduled time periods with "Time table
(page 46)".
Server directory
Name input
(Blank
♦
)
Enter the send destination directory.
•
Enter up to 255 single-byte alpha-numeric characters and
symbols, excluding &*:<>?\|~ and spaces.
File name
Time & date base
♦
/ Serial number
Specify the rules for the file name used for sending images.
Interval Value
input
s / min (units)
(1s
♦
)
Specifies the interval for image transmission by periodic timer.
•
Enter single-byte numbers within the range 1 to 1440.
•
Select either [s] (seconds) or [min] (minutes) as the time
unit.
Channel to send
Unselected
♦
/ All /
Cam.1 to Cam.64
Select the camera channel for image transmission by periodic
timer. Images from the camera whose check box is selected are
sent to the FTP server.
•
Image transmission by periodic timer cannot be used when
the image compression format of the selected camera
channel is [MPEG-4].
Содержание WJND400 - NETWORK DISK RECORDER
Страница 73: ...4 ...
