Panasonic WJND400 - NETWORK DISK RECORDER, Руководство по эксплуатации

Страница: 176 / 233

Schedules
47
♦
Initial default
*1 There must be at least 15 minutes between the specified start and end times.
*2 Refer to the "readme.txt" file on the CD-ROM for details about the software.
Note:
• If an alarm occurs, alarm message, Panasonic alarm protocol, and alarm mail operate even if they are off.
Connecting an external switch to the recorder makes it possible
control recording in accordance with external switch On/Off
operations. In order to perform externally controlled recording, you
will need to configure a recording program with schedule indicating
when the external switch is to be used.
For information about external switch connection, refer to the
Installation Guide.
The following is the priority sequence used when the individual day,
daily, and external recording schedules overlap.
[Ext.] > "[Mon] through [Sun] (day of week)" > [Daily]
The special days feature lets you assign the time table configured
for a day of the week to another day. You can assign up to 30
special days.
The following is the priority sequence used when the individual day,
daily, external recording, and special day schedules overlap.
[Ext.] > [Special days] > "[Mon] through [Sun] (day of week)" >
[Daily]
1
Click the [Schedule] button on the setup menu.
2
On the sub-menu that appears, click [Special days].
This will display the special days setting window.
3
Enter the date and day of the week of the special day.
4
Click the [Set] button.
Alarm message Off / On
♦
Specifies whether an event alert pop-up should appear on the
PC window of the administrator when an event occurs.
Panasonic alarm protocol Off
♦
/ On Specifies whether event information should be sent to a PC
automatically when an event occurs.
•
Refer to "Panasonic alarm protocol (page 66)" for details
about destination address settings.
• Special software
*2
is required for a PC to display received
information.
Alarm mail Off
♦
/ On Specifies whether alarm mail should be output when an event
occurs.
•
For information about configuring the mail server address,
destination address, and other mail settings, refer to "Mail
(page 5
8 )". For information about mail, refer to "Alarm mail
notification (page 90)".
Item Settings Description
About externally controlled recording
Important:
• Recording is not performed when input is received from an
external switch during a time for which there is no recording
program allocated. Be sure to allow enough margin when
allocating externally controlled recording times.
Special days