Panasonic WJND400 - NETWORK DISK RECORDER, Руководство по эксплуатации

Страница: 108 / 233

39
Power Supply
Turn on the recorder.
1
Insert the power plu g to an outlet.
120 V AC, 60 Hz for NTSC model
220 V - 240 V AC, 50 Hz for PAL model
• Make sure the po w er source matches the po w er
re q uirement of the model in use.
2
Turn on the [POWER] switch on the rear of the recorder.
• The operate indicator lights and recorder/HDD check
(system check)
b egins.
• During system check, [ W J-ND400] appears on the LCD.
Also, [Don ' t turn off] is displayed, follo w ed b y [System
Checking].
• The Time display format screen appears w hen the system
check is complete (page 40).
Turn off the recorder.
1
Set [Basic] - [Basic] - [Recordin g ] on the settin g s menu
to [Off] and stop all recordin g (refer to the Setup
Instructions (PDF file)).
2
Turn off the [POWER] switch on the rear of the recorder
after checkin
g that the HDD indicators are off.
The operate indicator goes off.
Note:
• Do not forget to start recording w hen you turn on the po w er.
1
Click the [STOP] button on the [HDD] tab to stop
playback (refer to the Operatin
g Instructions (PDF file)).
2
Turn off the [POWER] switch on the rear of the recorder
after checkin
g that the HDD indicators are off.
The operate indicator goes off.
Turnin g On the Power
Important:
• Do not turn off the po w er during the po w er on process.
• W hen using extension units ( W J-HDE400), turn on all
extension units b efore turning on the recorder.
Turnin g Off the Power
Important:
• W hen the recorder is not in use for an extended period of
time, unplug the po w er plug.
• Be sure to turn the po w er on and operate once a w eek to
check recording and play b ack functionality.
Durin g Recordin g
Durin g Playback
ND400_Basic.book 39 ページ ２００８年７月１０日 木曜日 午前１０時５０分