Panasonic S-ics Скачать руководство пользователя

Страница: 126 / 327

126

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 5. Key Telephone Features

Section 700 - Operation

Considerations

•

N/A

Background Music

Description

If your System is set up to provide Background Music, music can be played from the speakers of idle

telephones. If a call is made to an extension receiving Background Music, the music stops and the

phone rings. Background Music is also interrupted when the phone goes offhook.

The System can also provide Music-on-Hold (MOH) using a separate music source (except with

CPC-HS). If MOH is provided, callers automatically hear music when they are placed on hold. (For

more information on MOH, see page 47.)

Note:

CPC-HS has only 1 input that is used for both BGM and MOH.

Operation

To turn Background Music on:

To turn Background Music off:

Hardware Requirements

•

The music source must be purchased separately. It is not provided with the System.

Considerations

•

N/A

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the Background Music code (default =

*30

BGM ON

displays

3. Replace the handset or press the

ON/OFF

key.

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the Background Music code (default =

*30

BGM OFF

displays

3. Replace the handset or press the

ON/OFF

key.

Important:

A license may be required from the Society of Composers, Authors,

and Publishers (ASCAP) or similar organizations to transmit radio or recorded

music through the MOH and/or Background Music feature. Panasonic, its dis-

tributors, and affiliates assume no liability should users of Panasonic equipment

fail to obtain such a license.

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды