Panasonic S-ics Скачать руководство пользователя страница 294

Страница: 294 / 327

294

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 7. SLT Features

Section 700 - Operation

Operation

To set up the monitored extension:

When a monitored extension receives a call, the caller hears a busy tone. Additional operations may

be performed from the monitored extension when it is in monitored mode:

It is not possible to monitor an extension from an SLT telephone.

Hardware Requirements

•

N/A

Considerations

•

Be sure all phones that should NOT be allowed to monitor have a COS that restricts monitoring.

•

If the monitored extension is placed on-hook while Room Monitoring is activated, the

monitoring extension will hear a fast busy tone.

•

If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored

extension will remain in the monitored mode, and can be accessed by any other extension

allowed to access the room monitoring mode.

•

A room cannot be monitored from more than one extension at a time. If an attempt is made to

monitor an extension while the extension is being monitored, the user will hear a fast busy tone.

•

ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or

monitored modes.

•

A monitoring extension cannot forward a call on hold to a monitored extension.

•

A monitored extension cannot receive a transferred call.

Speed Dialling

Description

The System supports the following speed dial features:

•

Personal Speed Dial (PSD)

Action

Result

1. Dial the monitored extension access code (

default 775

)

Note:

The handset must be off-hook to activate the

Room Monitor feature.

You will hear a confirmation tone after
the monitored extension has enabled the
Room Monitor feature.

Action

Result

1. Placing the handset back on-hook

Monitored mode is cancelled. Extension
returns to idle.

2. Pressing digits 0-9, *, #

No response is given. Extension remains
in monitored mode.

3. FL/R

Monitored mode is cancelled. Dial tone is
returned to handset.

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Бренды по названию

Популярные бренды