Panasonic S-ics Скачать руководство пользователя

Страница: 152 / 327

152

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 5. Key Telephone Features

Section 700 - Operation

To set Call Forwarding All, Busy, or No Answer for a PDN from an NPDN or PNPDN:

Version 4.5 and higher

Note: FF1-0-03: NPDN and PNPDN Call Forwarding Programming Address

Hardware Requirements

•

N/A

Considerations

•

A DN can be assigned as a member of a hunt group.

•

DNs are not available for ISDN S-Point, pilot numbers of hunting groups, Voice Mail, ACD, API

and for the Attendant group.

•

A PDN must be assigned to a telephone before a corresponding NPDN can be used.

•

TRS Class and ARS Routing is determined on an extension port basis regardless of the DN

accessed.

•

Busy Override is available to the PDN conversation, but not available to the NPDN conversation.

•

Do-Not-Disturb (DND) can only be set through the PDN, but cannot be set through the NPDN.

•

Timed Reminder (Alarm Setting) is set through the PDN, but cannot be set through the NPDN.

•

Offhook Voice Announce is available to PDN conversation, but not available to the NPDN

conversation.

•

The appearance of incoming trunk calls have the following priority if the keys are set to the same

extension:

• Trunk/Floating Hold Key
• MCO Key
• DN Key
• Non-Appearance

Display Information

Description

Key telephones with a Liquid Crystal Display (LCD) reflect the following information:

•

Day and time (in 12 or 24 hour format)

•

Callback requests from other extensions

•

Caller ID information

•

Call duration

•

Extension number

Action

Result

1. Press an NPDN (or PNPDN) key.

Intercom dial tone

2. Dial the access code for Call Forwarding (Direct = 721),

(Busy = 722), (No Answer = 723).

3. Dial the Call Forward Destination extension number.

Dialed number displays

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды