Panasonic S-ics Скачать руководство пользователя

Страница: 71 / 327

Section 700 - Operation

Chapter 3. System Features

S-ICX-64-700

S-ICX (International) issued April 2002

Voice Mail

With the S-ICX, you have three primary voice mail options:

•

PanaVOICE Courier (integrated, installed internally)

•

Built-In (simplified functionality, installed and programmed internally)

•

External (a third-party application hooked up to the phone system)

PanaVOICE -- Panasonic’s Digital Voice Mail System

PanaVOICE Courier is a PC-based Voice Mail system offered by Panasonic. PanaVOICE Courier is

fully integrated. PanaVOICE Courier provides improved messaging with Message-Waiting

indication, constant message count on display phones, and visual menus on Large-display phones.

You can now install PanaVOICE Courier inside the S-ICX CCU, using the new Integrated Feature

Module (IFM) board. This board is actually a Pentium II 200 MHZ PC with a hard drive and voice

processing capabilities, running Windows NT. Panasonic now pre-loads Integrated Courier Voice

Mail on the IFM board.

Built-In Voice Mail with Two-Way Call Recording

The S-ICX’s Built-In Voice Mail option provides simplified Voice Mail functionality. Hardware for

this option is installed inside the S-ICX cabinet, and it is customized in system programming.

Each Built-In Voice Mail system supports up to 248 private extension mailboxes, plus another 6 for

general use, and can store up to 40 hours of messages. Up to 16 users can simultaneously access a

single Voice Mail system.

These are some of the functions of Built-In Voice Mail:

•

Extensions can be automatically assigned mailboxes (the mailbox number is the same as the

extension number).

•

General-use mailboxes can be set up.

•

Basic functions of Auto Attendant and backup call answering can be programmed.

•

Messages can be “broadcast” (copied) to multiple extensions.

•

Calls can be evenly distributed to different mailboxes during auto-answer mode.

•

2-way call recording can be performed. A recording can be either automatically or manually

stored as a message in any mailbox.

•

1-digit intercom dealing can be used during Voice Mail service (for example, the caller wants to

transfer himself to another extension after leaving a message).

•

Automatic notification of a mailbox message to an outside pager or phone number can be

programmed.

Third Party Voice Mail Support

Description

The System supports third party Voice Mail systems with features such as:

•

Answer Supervision for Voice Mail

•

Call Forward ID Code for Voice Mail

•

CLI/DDI ID Code for Voice Mail

•

High Priority Message Waiting

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды