Section 700 - Operation
Chapter 6. DSLT Features
S-ICX-64-700
S-ICX (International) issued April 2002
241
DP to DTMF Signal Conversion
Description
Dial Pulse (DP) to Dual Tone Multifrequency (DTMF) Signal Conversion allows you to switch from
DP to DTMF signalling when using a DP exchange line. For instance, if you dial into a Voice Mail
system using a DP exchange line, you can switch to DTMF signalling to communicate with the Voice
Mail system. (The System can automatically change DP to DTMF tones based on the incoming and
outgoing timers).
Operation
To switch from DP to DTMF dialling:
Hardware Requirements
•
N/A
Considerations
•
N/A
Flash
Description
You can send a flash signal on your telephone to release an outside line and then either automatically
reseize the same outside line or switch to extension dial tone status by pressing the
FLASH
key.
Exchange Line programming determines whether your phone reseizes the outside line or switches to
extension dial tone status.
Hardware Requirements
•
N/A
Considerations
•
N/A
Hot Line
Description
Hot Line enables you to immediately connect to another pre-assigned extension or speed dial number
simply by lifting the handset. You do not have to dial any digits.
Action
Result
1. Press the
*
key or the
#
key.
Содержание S-ics
Страница 12: ...Contents Section 700 Operation 12 S ICX International issued April 2002 S ICX 64 700 ...
Страница 212: ...212 S ICX International issued April 2002 S ICX 64 700 Chapter 5 Key Telephone Features Section 700 Operation ...
Страница 308: ...308 S ICX International issued September 2001 S ICX 64 700 Section 700 Operation ...
Страница 314: ...314 S ICX International issued April 2002 S ICX 64 700 Chapter 1 System Programming FF1 Section 700 Operation ...