Panasonic S-ics страница 45 Скачать руководство пользователя

Страница: 45 / 327

Section 700 - Operation

Chapter 3. System Features

S-ICX-64-700

S-ICX (International) issued April 2002

Circular Hunt Group

Circular Hunt Group initiates hunting in a specified group for calls made to a member extension in the

group. If the called member of the hunt group is busy, the System begins hunting forward to the end

of the group and then moves forward from the first member of the group. If no member is available

(extension is busy or there is no answer for a specified amount of time), the call is queued for the first

member to become available. You can also set the Queuing Timer and specify how the long the

System will search the initial hunt group before beginning to search the next hunt group or extension.

The main advantage of this type of hunting is that calls can be directed to start with a selected portion

of the hunting group based on the directed number. However, all members are eventually searched.

Next Extension/Hunt Group

Next Extension/Hunt Group lets you specify which extension or hunt group to search after the

Queuing Timer expires. This hunt group can be set as any type of hunt group, an attendant group, or

an extension (including virtual extensions).

Hardware Requirements

•

N/A

Considerations

•

If a member of the hunt group has Do-Not-Disturb (DND) or Call Forwarding - All set, that

phone is temporarily removed from the hunt group.

•

If a member of the hunt group has Call Forwarding - Busy set and the extension is busy, the call

goes to the next phone in the hunt group.

•

If all members are busy for the duration of the busy queuing timer, the call can be forwarded to

another hunt group or another extension.

•

A hunt group can contain both real extensions and virtual extensions. If virtual, several phones

can be made to ring at the same time.

•

The pilot number for a hunt group is flexible (i.e., any extension number can be designated as the

pilot [not a real extension]).

•

Hunt groups support the following call types:

• CLI (Called Line Identification) / Direct Dial Inward (DDI)

• Direct Inward System Access (DISA)

• Extension calls

• Private network attendant calls

• Call forward incoming

• Call forwarded to Attendant Hunt Group

• For Version 4.5 and higher, a queuing wait timer allows you to queue calls in a Hunt

Group for a fixed period of time. When the call has passed through the Hunt Group

once, the timer is activated and the call is re-routed to the top of the group. The system

continues to hunt for an available agent until the timer limit expires, and the call is

diverted to another location.

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды