Panasonic S-ics Скачать руководство пользователя страница 272

Страница: 272 / 327

272

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 7. SLT Features

Section 700 - Operation

To cancel Call Forwarding - All Calls:

Call Forwarding - Busy

When Call Forwarding - Busy is set, all incoming calls to a busy extension are forwarded.

To set Call Forwarding - Busy:

To cancel Call Forwarding - Busy:

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the appropriate Cancel Call Forwarding code:

• For your extension, enter

731

• For another extension, enter

751

3. If cancelling Call Forwarding for another extension, enter

the extension number.

4. Replace the handset.

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the appropriate Set Call Forwarding code:

• For your extension, enter

722

• For another extension, enter

742

3. If setting Call Forwarding for another extension, dial the

number of the extension whose calls you want to forward.

4. Enter the destination number:

• If forwarding to another extension, dial the extension

number.

• If forwarding to an outside number, press the

key then

enter the SSD bin number.

Note:

Any outside number used for Call Forwarding must

already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 276.)

5. Replace the handset.

Action

Result

1. Lift the handset.

Intercom dial tone

2. Enter the appropriate Cancel Call Forwarding code:

• For your extension, enter

732

• For another extension, enter

752

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Бренды по названию

Популярные бренды