Panasonic S-ics страница 226 Скачать руководство пользователя

Страница: 226 / 327

226

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 6. DSLT Features

Section 700 - Operation

To cancel Call Forwarding - No Answer:

Call Forwarding and Do-Not-Disturb

The System allows you to set or cancel both Call Forwarding and Do-Not-Disturb (DND) for your

own extension in one step.

To cancel Call Forwarding and DND:

Hardware Requirements

•

N/A

Considerations

•

Calls cannot be forwarded to an extension that already has Call Forwarding DND activated.For

example, extension 220 can only forward to extension 225 if 225 is not forwarded.

•

If forwarding to an outside number, the destination number must be pre-programmed into a

System Speed Dial (SSD) code.

•

Call Forwarding - Busy and Call Forwarding - No Answer can both be set at the same time.

4. Dial the destination number:

• If forwarding to another extension, dial the extension

number.

• If forwarding to an outside number, press the

key then

enter the SSD bin number.

Note:

Any outside number used for Call Forwarding must

already be programmed into speed dialling. (For instruc-
tions, see “Speed Dialling” on page 250.)

5. Replace the handset or press the

ON/OFF

key.

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the appropriate Cancel Call Forwarding code:

• For your extension, enter

733

• For another extension, enter

753

3. If cancelling Call Forwarding for another extension, dial the

extension number.

4. Replace the handset or press the

ON/OFF

key.

Action

Result

1. Lift the handset or press the

ON/OFF

key.

Intercom dial tone

2. Enter the CF/DND All Clear code (default =

7**

3. Replace the handset or press the

ON/OFF

key.

Action

Result

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды