Panasonic S-ics Скачать руководство пользователя

Страница: 122 / 327

122

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 5. Key Telephone Features

Section 700 - Operation

Hardware Requirements

•

N/A

Considerations

•

Calling parties without a display get a ring back tone, rather than the Absence Message.

•

If a message code number that has not been programmed is selected,

Absence No.n

, appears on

the display (n = message number).

•

Regardless of setting an Absence Message on a DDI/DL extension, DDI/DL calls are routed

according to the trunk ringing setting.

•

An absence message may also be cancelled by dialling

7**

. This cancels Do-Not-Disturb (DND)

and Call Forwarding-All Calls as well.

Account Codes

Description

You can assign account codes to clients to facilitate billing and to track call dates and times, numbers

called, and outside line numbers used. This information is printed for each account on the System

Message Detail Recording (SMDR) (Call Logging) record.

In addition verified account codes may be used to change the TRS (Call Barring) level to allow calls

to numbers otherwise restricted.

Account codes may be either forced or unforced (voluntary) and either verified or unverified.

This feature works with SMDR (Call Logging). During a phone call, a station user can silently enter

an accounting or client billing code. The entered Code will display on the phone’s LCD as it’s dialled,

so the user can tell it’s being registered. Then later, the Call Logging reports will show the Code

dialled for each call, and even sort the report by these Codes.

There are two different types of account codes: Non-Verified and Verified Account Codes. Prior to

Version 5.0, the maximum amount of account code numbers for both types could range from 1-10

digits. Beginning with Version 5.0, a second mode has been added that allows the user to set the

maximum amount of account code numbers from 1-4 digits. An account code error will occur when

more than the maximum number of digits are entered.

Non-Verified Account Codes

Non-Verified Codes aren’t checked by the system for validity. Depending on the setting, the user can

enter anything from 1-4 digits or 1-10 digits. Individual phones can be programmed to accept

forced

Account Codes

(the user must enter a code for every call) or

voluntary

Account Codes

(the user can

enter a code, but doesn’t have to, for each call).

Non-Verified Account Codes can be assigned to incoming and/or outgoing calls. For incoming calls,

the user can enter the Code anytime during the call. For outgoing calls, the user either enters the Code

before accessing an outside line (for

forced

Codes), or anytime during the call (for

voluntary

Codes).

Verified Account Codes

Verified Account Codes entered by phone users must match a code that has been preprogrammed into

an Account Code Table. Depending on the setting, the user can enter anything from 1-4 digits or 1-10

digits. These codes can also be either

forced

voluntary.

You can program these codes with their own

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды