Panasonic S-ics Скачать руководство пользователя

Страница: 250 / 327

250

S-ICX (International) issued April 2002

S-ICX-64-700

Chapter 6. DSLT Features

Section 700 - Operation

•

If the monitoring extension goes on-hook while Room Monitoring is activated, the monitored

extension will remain in the monitored mode, and can be accessed by any other extension

allowed to access the room monitoring mode.

•

A room cannot be monitored from more than one extension at a time. If an attempt is made to

monitor an extension while the extension is being monitored, the user will hear a fast busy tone.

•

ISDN (s-point) extensions cannot access the Room Monitor feature in either the monitor or

monitored modes.

•

A monitoring extension cannot forward a call on hold to a monitored extension.

•

A monitored extension cannot receive a transferred call.

•

If DND is enabled on either the monitoring or monitored extension, DND status is displayed on

the calling extension’s telephone.

•

If the monitoring or monitored extension has an absence message set, the absence message will

be displayed on the calling extension’s telephone.

Speed Dialling

Description

The System supports the following speed dial features:

•

Personal Speed Dial (PSD)

•

System Speed Dial (SSD)

•

Speed Dial Linking

•

Speed Dial Name Assignment

Personal Speed Dial

You can store frequently called numbers using the PSD feature. Up to 20 PSD numbers can be stored

in PSD bins numbered

Содержание S-ics








































































































































































































































































































































Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды

Panasonic S-ics, Техническое руководство

Результаты поиска

Содержание S-ics

Отзывы:

Похожие инструкции для S-ics

Бренды по названию

Популярные бренды