Panasonic Aquarea WH-MDF09C3E5, Руководство по установке

Страница: 82 / 90

9 – 82 Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
Commissioning
Programming
Special functions
➤
Switch the device off using the OFF / ON button before setting special
functions (operation LED does not light up) .
Setting special functions
SET
SELECT
SETTING
OFF/ON
WATER OUTLET
TIMER OUTDOOR
ACTUAL
HEATER
SETTING
STATUS
SERVICE
DEFROST
HEAT
COOL
TANK
QUIET
HEATER
FORCE
BOOSTER
STATUS
SEARCH
CANCEL
CLOCK FORCE SERVICE
ERROR
RESET
OFF/ON QUIET HEATER
MODE CHECK TIMER
OPERATION
SET
SELECT
SETTING STATUS
SEARCH
CANCEL
CLOCK FORCE
ERROR
RESET PUMPDW
OFF/ON QUIET HEATER
MODE CHECK TIMER
Step
Display on operator
control panel
Description
1
External room thermostat (YES / NO, Standard: NO)
Setting whether an external room thermostat is connected .
2 HEATER
Select the required output of the additional electric heater (3, 6 or 9 kW, Standard: Maximum) .
The output of the additional electric heater can be reduced if higher power is not needed .
This will depend on model selected .
3
Water antifreeze function (YES / NO, Standard: YES)
Activation or deactivation of the antifreeze function when the device is switched off .
4 TANK
Connection of a hot-water tank (YES / NO, Standard: NO)
Setting whether a hot-water tank is connected . Note: If “Hot-water tank connected” is set to
NO, steps 5 to 14 are skipped .
5 SOLAR
Solar priority (YES / NO, Standard: NO)
Setting the priority of the solar installation for water heating .
6 HEAT
Heating priority (YES / NO, Standard: NO)
Setting the heating as a priority over hot water .
Note: If “Heating priority” is set to YES, steps 7 to 8 are skipped .
7 HEAT
Duration of heating period
Setting the duration of heating mode in the heating and water operating mode .
(30 min . to 10 hours, Standard: 3 hours) .
8 TANK
Water heating duration
Setting the duration for water heating in the heating and water heating operating mode
(5 min . to 1 hour 35 min ., Standard: 30 min .) .
9 BOOSTER
Hot water immersion heating function (YES / NO, Standard: YES)
Activation or deactivation of hot water immersion heater .
Note: If the “Hot water immersion heating function” is set to NO, step 10 is skipped .
10 BOOSTER
Switch-on delay of the electric immersion heater for hot water
Setting the delay period before the immersion heater is switched on for the hot-water tank
if the tank temperature is not reached (20 min . to 1 hour 35 min ., Standard: 1 hour) .
11
Sterilisation (YES / NO, Standard: YES)
Setting for sterilisation of the hot water .
Note: If “Heating priority” is set to YES, steps 12 to 14 are skipped .
12
Day and time of sterilisation (Standard: Monday 12:00 noon)
Setting the day and time of weekly sterilisation (even when the device is switched off) .
13
Sterilisation temperature
Setting the temperature to be used for sterilisation (40 to 75 ℃, Standard: 70 ℃) .
14
Sterilisation duration
Setting of the period required to retain the tank temperature needed for sterilisation
(5 min . to 1 hour, Standard 10 min .) .
Ster
ilisation only appears
if the
TANK is set to
YES
.
Only displa
yed if HEA
T
PRIORITY is set to NO
These men
u items are only displa
yed
if
TANK is set to
YES
.
Danger!
During sterilisation, do not re-
move hot water, as this can
lead to burns or overheating .
The sterilisation function set-
tings must be made by an au-
thorised dealer in accordance
with the local laws and guide-
lines .