4 – 28
Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
Location | Installing and fastening the devices
Installation
Monobloc systems or split system outdoor units
Protection against toppling over via anchoring
For installation locations which can be impacted by strong winds, e .g .
wind between buildings, including building roofs, the monobloc unit or
split system outdoor unit must be secured on-site with additional protec-
tion to prevent it toppling over .
➤
Fasten the split system outdoor unit to a concrete foundation or a sta-
ble base frame, e .g . to the exterior wall of a building, using M10 screws
as shown . Ensure that the outdoor unit is installed horizontally level .
When fastening the split system outdoor unit on a base frame / bracket to
the exterior wall of the building, vibration absorbers must be mounted un-
der the outdoor unit . If fastened to a concrete foundation, we recommend
using vibration absorbers .
Split system outdoor unit drilling
template
620
140
900
35
5
32
0
