Panasonic Aquarea WH-MDF09C3E5, Руководство по установке, Страница: 83 / 90

9 – 83 Aquarea air/water heat pump – Installation manual for monobloc and split systems C, D and E series 05 / 2014
9
Commis
-
sioning
Commissioning
Programming
Special functions
➤
Set the individual special functions as follows:
➤
Press the SET and CHECK buttons for 5 seconds to switch to
Programming mode for the special settings . The SETTING
(programming) and STATUS displays (system status) are shown .
➤
Use the UP or DOWN buttons to toggle through the functions .
➤
Press the SELECT button to access the settings for the respective
function .
➤
Press the UP or DOWN buttons to activate (UP) or deactivate
(DOWN) the functions, or to set the time and weekday .
➤
Press the SET button to confirm the setting .
SET
SELECT
SETTING
OFF/ON
WATER OUTLET
TIMER OUTDOOR
ACTUAL
HEATER
SETTING
STATUS
SERVICE
DEFROST
HEAT
COOL
TANK
QUIET
HEATER
FORCE
BOOSTER
STATUS
SEARCH
CANCEL
CLOCK FORCE SERVICE
ERROR
RESET
OFF/ON QUIET HEATER
MODE CHECK TIMER
OPERATION
SET
SELECT
SETTING
OFF/ON
WATER OUTLET
TIMER OUTDOOR
ACTUAL
HEATER
SETTING
STATUS
SERVICE
DEFROST
HEAT
COOL
TANK
QUIET
HEATER
FORCE
BOOSTER
STATUS
SEARCH
CANCEL
CLOCK FORCE SERVICE
ERROR
RESET
OFF/ON QUIET HEATER
MODE CHECK TIMER
OPERATION
SET
SELECT
SETTING STATUS
SEARCH
CANCEL
CLOCK FORCE
ERROR
RESET PUMPDW
OFF/ON QUIET HEATER
MODE CHECK TIMER
SET
SELECT
SETTING STATUS
SEARCH
CANCEL
CLOCK FORCE
ERROR
RESET
PUMPDW
OFF/ON QUIET HEATER
MODE CHECK TIMER
DEFROST
SETTING
STATUS
SERVICE
1. Connection of a room thermostat
(YES / NO, Standard: NO)
3. Water antifreeze function
(YES / NO, Standard: YES)
2. Select the required output
of the additional electric heater
(3, 6 or 9 kW, Standard: Maximum)
DEFROST
SETTING
STATUS
SERVICE
4. Connection of a hot-water tank
(YES / NO, Standard: NO)
DEFROST
SETTING
STATUS
SERVICE
5. Solar priority (YES / NO, Standard:
NO) If a solar thermal system is used,
this value should always be set to
YES .
DEFROST
SETTING
STATUS
SERVICE
6. Heating priority (YES / NO,
Standard: NO) . If possible, this value
should be left as NO, as otherwise
hot water is only heated with the
electric immersion heater .